Skip to main content

Introducing the new ENTR kiosk experience

What's new in the rebuilt ENTR app, what visitors see at the kiosk, the four kiosk modes, and how to set it up.

J
Written by Justine Matton

The NineID ENTR app is the check-in and check-out app that runs on the tablet at your site entrance. We've rebuilt it from the ground up: one clear flow for every visitor, contractor, trucker or employee, with the same access, compliance and audit rules you already set in NineID. No paper sign-in sheets, and no gap between who's authorized and who's at the door.

This article explains what's new, what people see at the kiosk, and how to set it up.

Summary

  • One app for every type of visitor, driven by your configuration.

  • People identify with a personal QR code, a magic code from their email, or by registering on the spot.

  • ENTR checks access, runs the required tasks, records the check-in and prints a badge if you have a printer.

  • Each tablet can be set to a kiosk mode: Full, Registration, Check-in or Triage.

  • The new experience is switched on by NineID for your organization. Contact your Customer Success Manager to plan the move.

✨ What's new

  • One flow for everyone: visitors, contractors, truckers and employees all use the same app on the same tablet. What each person is asked depends on the visit type and role you configure.

  • A clearer welcome screen: people choose check-in or check-out, then pick how they want to identify.

  • Clear access decisions: if someone is expected, they confirm their visit. If they're not allowed in, the kiosk tells them why.

  • Custom questions at check-in: ask for the reason for the visit, a contact person, or any of your own custom properties, one question per screen.

  • Kiosk modes: give each tablet a specific job, for example a registration-only tablet or a lobby scan station.

  • Fast check-out: identify, confirm, done.

🚶 The process at the kiosk

Every check-in follows the same steps, whatever tablet or identification method is used.
​

1. Identify

The person picks one of three ways to identify:

  • Personal QR code, scanned by the tablet camera or a hardware scanner.

  • Magic code: the 16-character code they received by email, prior to their visit.

  • Walk-up: they enter their phone number or email address (depending on your site settings). If NineID doesn't know them yet, they register ad hoc, on the spot by entering their first and last name.

ℹ️ A phone number is always collected, because check-out uses it to find the person.
​

2. Access check

ENTR checks whether the person is expected and allowed in this zone right now:

  • One visit planned: they confirm it.

  • Several visits planned: they pick the right one.

  • No visit planned: if the tablet allows it, they can create a visit themselves.

  • Not allowed: the kiosk shows the reason and the attempt is recorded.

🤳 If your site requires a selfie, it's taken right after the access check, so people who aren't allowed in are never asked for a face scan.
​

3. Questions and tasks

  • If the visit type has questions set up, each question appears on its own screen.

  • Next, the person completes any open tasks for their role, such as uploading ID documents, accepting the GDPR notice, watching a safety briefing or providing certificates.

  • If a work permit is set up, they sign it off as the final step.

⏲️ Check-in stays blocked until the requirements are met.
​

4. Check-in and badge

The check-in is recorded for the tablet's zone. If a badge printer is connected, the badge prints automatically.
​

Check-out

Check-out is short: the person identifies, ENTR finds their active check-in, and they're checked out. If a check-out section is set up on the work permit, they fill it in first.
​

📟 Kiosk modes

Each tablet has its own kiosk mode, set by an admin:

  • Full: check-in and check-out by QR code, magic code or walk-up.

  • Registration: walk-up self-registration only. No check-out.

  • Check-in: only for people who are already expected. No self-registration.

  • Triage: a QR-only scan station, for example in a lobby, that shows a person's status without checking them in or creating anything.

🫵 You can also limit a tablet to check-in only, check-out only or both.
​

🔧 How to set it up

⚠️ The new ENTR experience is switched on by NineID for your organization as part of a guided move. Until then, your tablets keep running the current flow unchanged. Please contact your Customer Success Manager to plan it.

1. Set the site policy

Go to Settings → Sites, open your site and go to Policies. Choose:

  • The walk-up identification method: phone or email.

  • Whether a selfie is required at entry (only available if face match is part of your plan).

❗ These settings apply to every tablet on the site.
​

2. Pair a tablet

  1. Go to Settings → Sites, open your site and go to Devices. Click Add device. A pairing QR code appears, along with links to the app stores.

  2. Install the NineID ENTR app on the tablet (App Store). ( ⚠️ iOS only for now, Android is expected in the course of October 2026, our apologies )

  3. Open the app and scan the pairing QR code. The device detail screen opens automatically once pairing is complete.

ℹ️ Want to test first? Choose Skip, link later to create a virtual kiosk without a physical tablet. Need to re-pair a tablet? Use Reconfigure to get a new pairing QR code. The device's name, zone and settings stay the same.

For a detailed walkthrough, see Device Set Up Guide: ENTR App.
​

3. Configure the tablet

  • General: name, description and zone. Each device is linked to one zone.

  • Kiosk configuration: kiosk mode, check direction (both, check-in only or check-out only), the visit types this tablet offers (leave empty to offer all), and the printer URL if you print badges.

4. Set up the check-in questions

Go to Settings → Visit Types, open a visit type and go to Fields.

  • Turn Reason and Contact Person on or off, and mark them as required if needed.

  • Add your own custom properties ( your chosen fields that can be created under Settings → Custom Properties) and drag them into the order they should be asked.

5. Set the tasks for each role

The tasks a person completes at check-in come from their role. For now, these are set in the Manager: go to Configuration → Roles, open a role and go to the Requirements tab. Add and reorder the tasks. If the role already has users, set a grace period (0 = immediately) before the change applies to them.

If a role has no tasks, this step is skipped.
​
​

❓ Frequently asked questions

Does a visitor need an account?
No. If a walk-up (ad hoc visit) visitor isn't known yet, they register on the spot. A QR code or magic code links to an existing person.

Can one tablet handle visitors, contractors and truckers?
Yes. The same app and tablet handle every type of visitor, based on the visit types you offer on that tablet.

What if someone hasn't finished their tasks?
They can't check in until the requirements possibly translated in task are met. Some self-registrations are marked as "review pending": the visit is registered, but the person isn't checked in yet and is told that staff will verify them at the gate.

Do I need a printer or scanner?
No. A badge printer, camera and hardware scanner are all optional for each tablet.

Can I switch to the new experience myself?
No. NineID switches it on for your whole organization during a guided move. Please contact your Customer Success Manager.

Can people identify with an ID document at walk-up?
Not yet. Walk-up identification currently works by phone or email.


Need help? Reach out to [email protected]. Including a screenshot or the specific error message helps our team assist you faster!

Did this answer your question?